Detailed Product Description

This controller can control LED modules, LED ribbons, LED bars, High Power LED modules and other LED lighting fixture. Max output 15A. Max power load consumption 150W. and RoHS approved.

Using Instruction
1)When the load power is over the controller's max output power, you should use the amplifier. Amplifier quantity depends is base on the led products max loading.
2)four pin connections port (connect power) is the input port, six pin connects is output port, as the diagram showing, connect the wire base on the printed instruction. V+ is the anode wire, R, G, B pin port is corresponding R, G, B wire which is from RGB light bar.
3)Suggest use drawing 3, 4 connect way when the led product is too long. This method can guarantee lighting's synchronization
4)SIGNAL LIGHT POWER LIGHT
5)DC12V: Input Voltage. Please make sure match the anode and cathode when connection.
Notice:
1) Before use it, be sure check the RGB light bar or RGB LED Module voltage is suitable with the amplifier or not.
2) Power supply max load power need to be kept 20% rest.
3) If the led product doesn't use the same power supply, need to connect cathode of all the power supply together.